JF-TSN-3000 sulfur nitrogen analyzer uses ultraviolet fluorescence method to measure total sulfur content and chemiluminescence method to determine total nitrogen content. The key components are imported devices. Compared with similar instruments at home and abroad, it has stable and reliable performance and high analysis accuracy. Good repeatability and other characteristics, instead of import.
The instrument is widely used in petroleum, petrochemical, inspection of import and export commodities, biopharmaceuticals, environmental protection, health, teaching, scientific research and other departments to determine paraffin oil, diesel oil, kerosene, gasoline, lubricants, fuel oil, liquefied gas, natural gas, and Total sulfur / nitrogen content of other oil products, chemical raw materials and finished products.
Sample type: liquid, solid, and gas sample injection volume: solid sample: 1 ～ 20mg
Liquid sample: 5 ～ 40μL
Gas sample: 1 ～ 10mL
Measurement range: liquid sample 0.2 ～ 20000mg / L
Solid sample 1.0 ～ 20000mg / kg
Gas sample 0.2 ～ 20000mg / m3
Lower detection limit: liquid sample 0.2mg / L
Solid sample 1.0mg / kg
Gas sample 0.2mg / m3
Temperature control range: room temperature to 1100 ° C
Temperature control accuracy: 0.5% ± 5 ℃
Gas source requirements: argon: more than 99.995% oxygen: more than 99.99% power supply: AC220V ± 22V; 50Hz ± 0.5Hz
● High sensitivity detection capability:
According to ASTM and SH / T standards, CLD chemiluminescence and UV ultraviolet fluorescence technology were used to detect N and S, respectively. Extremely high sensitivity and high-efficiency detection capability make the detection limit up to 20000ppm
● Microelectronics technology:
Adopting full-function digital control technology, fully intelligent and automatic design. All parameters of the instrument are optimized and controlled by computer. Enables automated operations including remote network control and diagnostic analysis.
● Excellent software design:
Windows-based software enables complete control of the instrument via a PC. Realize dual-mode digital and graphic monitoring of instrument working status in real time. There are no special skills required for the operator's chemical analysis and software use.
● Diversified application methods:
It can realize the simultaneous measurement of single S element, single N element or S / N double element in liquid, solid or gas samples according to the instrument configuration.
Previous product: JF-TSN-5000 series sulfur and nitrogen analyzer
Next product: JF-TSNCl-100 sulfur nitrogen nitrogen chloride analyzer
All rights reserved
Address: No. 66 Jiangyan Avenue, Jiangyan District, Taizhou City, Jiangsu Province Post code: 225500 Fax: 0523-88819701 88819768
Phone: 0523-88819758 88819759 88819706 88819796 E-mail: sales # jbtorrent.com (change # 为 @)